QR code attendance that cannot be shared in a photo.
With QR attendance, an employee shows a code from the Zentaro Pulse app and a tablet at the gate scans it. The code changes every 60 seconds, so a screenshot is no use to a friend. Visitors, contractors and vendors can get their own QR passes.
- A code that changes every 60 seconds
- Scanned by a shared tablet
- Passes for visitors and contractors
- Every scan is recorded
Without it
- A photo of a code can be shared with a friend.
- Visitors and contractors write their names in a book.
- Nobody can say who came in at what time.
What it does.
A code that changes every 60 seconds
The employee code is short-lived. An old photo of it will not mark attendance.
Scanned by a shared tablet
A tablet at the gate reads the code. No badge or machine is needed.
Passes for visitors and contractors
Give a visitor, a contractor or a vendor a QR pass for the day or the job.
Every scan is recorded
Each scan records who, when and at which device, so the history is easy to check.
How it works.
-
Step 1
Set up the gate tablet
Put a tablet in kiosk mode at the entrance and register it as a device.
-
Step 2
Staff show their code
The employee opens the app. A fresh QR code is shown.
-
Step 3
The tablet scans it
The tablet reads the code, checks it is still valid and records the punch.
-
Step 4
Visitors use passes
For visitors and contract workers, a pass is issued and scanned the same way.
The problem you know
What goes wrong without it.
- Codes that can be copied. A fixed code on a wall or a phone can be shared.
- Visitors are not recorded. Contractors and vendors often skip the register.
- No clear history. A scan that is not recorded cannot be checked later.
What it is not
- It is not a fixed printed code. The employee code changes every 60 seconds.
- It does not need a badge or a machine at the gate.
Who it is for.
Who it is for
- Factories and warehouses with a gate
- Offices that receive many visitors and vendors
- Sites that use contract labour
Want to see how it fits your team? Talk to us
Questions people ask.
How does QR code attendance work?
The employee shows a QR code in the app. A shared tablet scans it and records the punch. Zentaro Pulse launches in 2027.
Can a QR code be shared with a friend?
A code is valid for 60 seconds, so a saved photo stops working quickly. This makes sharing hard but not impossible, so pair it with other checks.
Can visitors and contractors use QR?
Yes. Visitor, contractor and vendor passes are supported.
Do I need special hardware?
You need a tablet for the gate. No separate scanner machine is needed.
Is there a QR code for each shift or each place?
Not today. The QR code belongs to the employee and changes every 60 seconds.
Be first to hear when Zentaro Pulse launches
Zentaro Pulse is launching in 2027. Join early access and we will tell you first. Or ask us a question now.
Last updated: