To set up geofence attendance, draw a circle around each work site and pick a radius in metres. Switch on the check for the teams that need it, then test it on a real phone at the edge of the site. Tell staff what is recorded. A radius of 100 to 200 metres is a common starting point.
What a geofence does
A geofence is a virtual circle on a map. When a person clocks in on the phone app, the app checks whether the phone is inside the circle. Inside means accepted. Outside means flagged for a manager.
In Zentaro Pulse the geofence is a circle with a radius in metres, set for your company. There is no custom-shape boundary and no route tracking. It checks where the person is at clock-in, with consent.
Before you start
- The exact place of each site on a map.
- Which teams need the check, and which do not.
- Whether staff clock in inside a building, a basement or in the open.
- A short note for staff about what is recorded and why.
Step 1: pick a radius
GPS on a phone is rarely exact. Indoors it can be off by tens of metres. A circle that is too small rejects people who are standing at the door. A circle that is too large lets people clock in from the road.
| Kind of site | Starting radius | Why |
|---|---|---|
| Shop or small office in a busy area | 50 to 100 m | Small, but buildings block the signal |
| Factory or campus | 150 to 300 m | Large grounds and gates far from the main hall |
| Construction site | 200 to 300 m | Open ground, a wide working area |
| Basement or inside a large mall | 100 to 200 m | Weak signal indoors, so allow more room |
Step 2: place the circle
- Open the site settings and find the place on the map.
- Put the centre where most people enter, not in the middle of a large site.
- Set the radius in metres.
- Save, and apply it to the teams that work at that site.
Step 3: test at the edge
Walk to the edge of the circle with a real phone. Try a clock-in just inside and just outside. Test indoors and in the open, with and without a strong signal.
A shop sets a 100-metre radius. On day one, 6 clock-ins from the back store room are flagged.
The manager checks the map. The store room sits 130 metres from the pin, because the pin was placed at the front door.
She moves the centre to the middle of the building and sets 150 metres. Flags drop to near zero.
Step 4: handle weak GPS and flagged cases
Plan for a flag to be a question, not a punishment. A manager opens the flagged clock-in, sees where the phone was, and approves or declines. A person who was really at work should be easy to approve.
Fraud checks add more signals, such as a phone that reports a fake location. These are rule-based checks that raise a case for review. They do not catch everything.
Step 5: tell staff
Say what is recorded and when. The app uses location for the clock-in check, with consent. There is no background tracking. If you turn on automatic clock-out when staff leave the circle, say so, because the app then reads the position while it is open. Ask staff to confirm they have read the note.
Fixing common problems
- People are flagged at the door: increase the radius or move the centre.
- People clock in from the road: reduce the radius.
- Indoor clock-ins fail: allow more room, or add a QR code at the entrance as a back-up.
- A site moves: update the circle the same day.
Questions people ask
What radius should I use for a geofence?
A common starting point is 100 to 200 metres. Test on real phones and adjust.
Why is a person flagged when they are at work?
Phone location can be off, especially indoors. Check the map, adjust the radius, and let a manager approve the flagged clock-in.
Can I draw any shape?
No. A geofence in Zentaro Pulse is a circle with a radius in metres.
Does the app track staff all day?
No. There is no background tracking. Location is used for the clock-in check, with consent.
What if there is no signal at the site?
The phone app can save a punch and send it when the network returns. Use a QR code as a back-up where the signal is poor.
Where Zentaro Pulse fits
In Zentaro Pulse you set a circle and a radius for each site, then test it before staff use it. Launching 2027.
Get early access